Product Overview
IMUP8 is a 6-degree-of-freedom MEMS inertial sensor module developed by Yuanji Technology. It provides standard output for triaxial gyroscope and accelerometer data.
High accuracy and resolution allow it to detect the slightest vibrations and tilts. The wide output range facilitates the detection of motion in highly dynamic conditions. Each module undergoes factory fine-tuning across an ultra-wide temperature range and independent calibration, ensuring stable operation in extreme operating conditions while maintaining consistent product performance.
Application：Aerial Surveying
Tactical-grade MEMS 6-DOF Inertial Sensor
AND-IMUP8 Product Manual
Caractéristiques
Tactical-grade MEMS Gyroscope
● 0.5°/hr zero bias instability
● 0.1°/√hr angular random walk
● 30°/hr temperature drift (-40 to 85°C, ≤1°C/min @1°C)
Tactical-grade MEMS accelerometer
● 20μg bias instability
● 0.035m/s/√hr velocity random walk
● 1.Qmg temperature drift (-40°C to 85°C, ≤1°C/min @1σ)
Extensive precision temperature compensation
● Temperature compensation from -40°C to 85°C
● Precision temperature calibration
Independent Gimbal Calibration
● Independent calibration per module: sensitivity, zero bias, non-orthogonality error
● User-configurable interface for installation error calibration
High-Intensity Operating Tolerance
● Superior shock resistance: 2000g (0.5ms, half-sine, 3-axis)
● Superior vibration resistance: 10g (10–2kHz, 3-axis)
● Full-temperature stable operation: -40°C to 85°C
● 100% magnetic shielding
Real-time Flexible Digital Interface, Compact Form Factor
● Configurable output sampling rate up to 1kHz
● Supports serial interface 422
● Dimensions: 38.6 × 44.8 × 21.5mm, Weight: approx. 58g
1. Performance Parameters
| 1.1 Gyroscope performance indicators | ||||||||
| Paramètres | Test Conditions/Remarks | Min | Valeur typique | Max | Unité | |||
| Plage de mesure | ± 300 | ° / s | ||||||
| Zero Offset Instability | @25℃, ALLAN variance,1σ | 0.5 | ° / h | |||||
| Zero Offset Stability | 10-second smoothing | 2 | ° / h | |||||
| Zero Offset Repeatability | NS | 3 | ° / h | |||||
| Résolution | 0.0041 | ° / s | ||||||
| Inter-axis Non-orthogonality | 0.02 | deg | ||||||
| Internal Low-pass Cutoff Frequency | Software-adjustable | 10 | 75 | HZ | ||||
| Taux d'échantillonnage | 1000 | 1000 | HZ | |||||
| Measurement Delay | 7.2 | ms | ||||||
| Zero Offset Drift Over Full Temperature Range | -40℃~85℃, <=1℃/min @1σ |
30 | ° / h | |||||
| Random Walk | @25℃, ALLAN variance,1σ | 0.1 | °/ √hr | |||||
| Scale Factor Error | 1.0 | ‰ | ||||||
| Non-linéarité du facteur d'échelle | 50 | ppm | ||||||
| Note 1: 1σ value of zero offset variation across the entire temperature range under a heating rate of 1°C per minute | ||||||||
| Note 2: IEEE standard, Allan variance curve provided under static 25°C conditions. | ||||||||
| 1.2 Accelerometer performance indicators | |||||||||
| Paramètres | Test Conditions/Remarks | Min | Valeur typique | Max | Unité | ||||
| Plage de mesure | ±6 | ±20 | g | ||||||
| Zero Offset Instability | @25℃, ALLAN variance,1σ | 20 (±6) |
μg | ||||||
| 25(± 20g) |
μg | ||||||||
| Zero Offset Stability | NS，10-second smoothing | 30(±6) | μg | ||||||
| 60(± 20g) |
μg | ||||||||
| Zero Offset Stability | NS | 20(±6) | μg | ||||||
| 40(± 20g) |
μg | ||||||||
| Résolution | 0.0816 | mg | |||||||
| Inter-axis Non-orthogonality | 0.02 | deg | |||||||
| Internal Low-pass Cutoff Frequency | Software-adjustable | 75 | HZ | ||||||
| Taux d'échantillonnage | 1000 | 1000 | HZ | ||||||
| Measurement Delay | 7.2 | ms | |||||||
| Zero Offset Drift Over Full Temperature Range | -40℃~85℃, <=1℃/min @1σ |
1.0 | mg | ||||||
| Random Walk | @25℃, ALLAN variance,1σ | 0.035(± 6) |
m/s/ √ hr |
||||||
| 0.04(± 20) |
m/s/ √ hr |
||||||||
| Note 1: 1σ value of zero offset variation across the entire temperature range under a heating rate of 1°C per minute | |||||||||
| Note 2: IEEE standard, Allan variance curve provided under static 25°C conditions. | |||||||||
3. Specifications
| 3.1 Maximum absolute value | |||||||||
| Paramètres | Measurement level | Remarks | |||||||
| Température de stockage | -55℃-90℃ | ||||||||
| VSUP to GND | -0.5-6.5V | ||||||||
| Température de fonctionnement | -40-+85℃ | ||||||||
| RXD+/RXD-to GND | -7.5V~12.5V | Matching resistor 120Ω | |||||||
| RXD+to RXD- | ±6V | ||||||||
| TXD+/TXD-to GND | -7.5V~12.5V | ||||||||
| ExtTrig to GND | -0.3V-7V | ||||||||
| NRST to GND | -0.3V-7V | ||||||||
| DATA READY to GND | -0.3V-7V | ||||||||
3.2 EMC
| Test items | Testing standards | |||||||
| CE | Complies withEN55032 CISPR 16-2-1 | |||||||
| CS | Complies withEN55035 EN(IEC)61000-4-6 | |||||||
| EFT | Complies withEN55035 EN(IEC)61000-4-4 | |||||||
| RE | Complies withEN55032 CISPR 16-2-3 | |||||||
| RS | Complies withEN55035 EN(IEC)61000-4-3 | |||||||
| ESD | Complies withEN55035 EN(IEC)61000-4-2 | |||||||
3.3 Electrostatic Discharge (ESD) Level
| V(ESD) Electrostatic Discharge | Test Mode | Testing standards | Test Level | ||||||
| Contact Discharge | Complies with EN(IEC)61000-4-2 |
±8 KV | |||||||
| Air Discharge | ±15 KV | ||||||||
4. Electrical characteristics
| Paramètres | Condition | Min | Typical Value | Max | Unité | ||
| Power Input | 4.5 | 5 | 5.5 | V | |||
| Pouvoir | 0.7 | W | |||||
| Température de stockage | -55 | 90 | ℃ | ||||
| Température de fonctionnement | -40 | 85 | ℃ | ||||
| RS422 Input Resistance | 120 | Q | |||||
| RESET(NRST PIN) |
High | 2.3 | V | ||||
| Low | 0.6 | V | |||||
| NRST Internal Pull-Up Resistor’ | 4.7 | KΩ | |||||
| Data Ready | 3.3 | V | |||||
| ExtTrig | High | 2.3 | V | ||||
| Low | 0.6 | V | |||||
| Note: When the supply voltage exceeds 6V, the internal voltage protection circuit will disconnect the power supply and enter a reset state until the voltage returns to operating conditions, at which point normal operation will resume. | |||||||
| No.Pin | Pin NAme | Pin Description |
| 1 | 422_TX_Z | RS-422, TXD- |
| 2 | 422_RX_B | RS-422, RXD- |
| 3 | NC | Not connected |
| 4 | DATA READY | Data Ready |
| 5 | NRST | External hardware reset input, internally pulled up |
| 6 | GND | Signal ground |
| 7 | NC | Not connected |
| 8 | VIN | Power supply input, +5V input |
| 9 | 422_TX_Y | RS-422, TXD+ |
| 10 | 422_RX_A | RS-422, RXD+ |
| 11 | ExtTrig | External trigger pps |
| 12 | GND | Power supply ground |
| 13 | GND | Power supply ground |
| 14 | NC | Not connected |
| 15 | GND | Power supply ground |
Si vous avez un compte DHL ou FedEx, nous pouvons citer le prix EXW, sinon CIF ou FOB Price.
Après avoir soumis le prix de l'échantillon, si plus de quantité est nécessaire, nous citerons le prix en vrac.
Pour les capteurs, les pièces et les modules: dans une semaine de stock-un;
Après avoir confirmé que le produit a des problèmes de qualité, nous le remplacerons gratuitement dans les plus brefs délais.
Chez ici, il s'agit de donner aux clients des produits de qualité les plus importants.
