Product Overview
IMUP8 is a 6-degree-of-freedom MEMS inertial sensor module developed by Yuanji Technology. It provides standard output for triaxial gyroscope and accelerometer data.
High accuracy and resolution allow it to detect the slightest vibrations and tilts. The wide output range facilitates the detection of motion in highly dynamic conditions. Each module undergoes factory fine-tuning across an ultra-wide temperature range and independent calibration, ensuring stable operation in extreme operating conditions while maintaining consistent product performance.
Application：Aerial Surveying
Tactical-grade MEMS 6-DOF Inertial Sensor
AND-IMUP8 Product Manual
سمات
Tactical-grade MEMS Gyroscope
● 0.5°/hr zero bias instability
● 0.1°/√hr angular random walk
● 30°/hr temperature drift (-40 to 85°C, ≤1°C/min @1°C)
Tactical-grade MEMS accelerometer
● 20μg bias instability
● 0.035m/s/√hr velocity random walk
● 1.Qmg temperature drift (-40°C to 85°C, ≤1°C/min @1σ)
Extensive precision temperature compensation
● Temperature compensation from -40°C to 85°C
● Precision temperature calibration
Independent Gimbal Calibration
● Independent calibration per module: sensitivity, zero bias, non-orthogonality error
● User-configurable interface for installation error calibration
High-Intensity Operating Tolerance
● Superior shock resistance: 2000g (0.5ms, half-sine, 3-axis)
● Superior vibration resistance: 10g (10–2kHz, 3-axis)
● Full-temperature stable operation: -40°C to 85°C
● 100% magnetic shielding
Real-time Flexible Digital Interface, Compact Form Factor
● Configurable output sampling rate up to 1kHz
● Supports serial interface 422
● Dimensions: 38.6 × 44.8 × 21.5mm, Weight: approx. 58g
1. Performance Parameters
| 1.1 Gyroscope performance indicators | ||||||||
| حدود | Test Conditions/Remarks | دقيقة | القيمة النموذجية | الأعلى | وحدة | |||
| نطاق القياس | ± 300 | ° / s | ||||||
| Zero Offset Instability | @25℃, ALLAN variance,1σ | 0.5 | ° / ساعة | |||||
| Zero Offset Stability | 10-second smoothing | 2 | ° / ساعة | |||||
| Zero Offset Repeatability | NS | 3 | ° / ساعة | |||||
| دقة | 0.0041 | ° / s | ||||||
| Inter-axis Non-orthogonality | 0.02 | deg | ||||||
| Internal Low-pass Cutoff Frequency | Software-adjustable | 10 | 75 | هرتز | ||||
| معدل أخذ العينات | 1000 | 1000 | هرتز | |||||
| Measurement Delay | 7.2 | آنسة | ||||||
| Zero Offset Drift Over Full Temperature Range | -40℃~85℃, <=1℃/min @1σ |
30 | ° / ساعة | |||||
| Random Walk | @25℃, ALLAN variance,1σ | 0.1 | °/ √hr | |||||
| Scale Factor Error | 1.0 | ‰ | ||||||
| عامل النطاق غير الخطي | 50 | جزء في المليون | ||||||
| Note 1: 1σ value of zero offset variation across the entire temperature range under a heating rate of 1°C per minute | ||||||||
| Note 2: IEEE standard, Allan variance curve provided under static 25°C conditions. | ||||||||
| 1.2 Accelerometer performance indicators | |||||||||
| حدود | Test Conditions/Remarks | دقيقة | القيمة النموذجية | الأعلى | وحدة | ||||
| نطاق القياس | ±6 | ±20 | ز | ||||||
| Zero Offset Instability | @25℃, ALLAN variance,1σ | 20 (±6) |
ميكروغرام | ||||||
| 25(± 20g) |
ميكروغرام | ||||||||
| Zero Offset Stability | NS，10-second smoothing | 30(±6) | ميكروغرام | ||||||
| 60(± 20g) |
ميكروغرام | ||||||||
| Zero Offset Stability | NS | 20(±6) | ميكروغرام | ||||||
| 40(± 20g) |
ميكروغرام | ||||||||
| دقة | 0.0816 | ملغ | |||||||
| Inter-axis Non-orthogonality | 0.02 | deg | |||||||
| Internal Low-pass Cutoff Frequency | Software-adjustable | 75 | هرتز | ||||||
| معدل أخذ العينات | 1000 | 1000 | هرتز | ||||||
| Measurement Delay | 7.2 | آنسة | |||||||
| Zero Offset Drift Over Full Temperature Range | -40℃~85℃, <=1℃/min @1σ |
1.0 | ملغ | ||||||
| Random Walk | @25℃, ALLAN variance,1σ | 0.035(± 6) |
m/s/ √ hr |
||||||
| 0.04(± 20) |
m/s/ √ hr |
||||||||
| Note 1: 1σ value of zero offset variation across the entire temperature range under a heating rate of 1°C per minute | |||||||||
| Note 2: IEEE standard, Allan variance curve provided under static 25°C conditions. | |||||||||
3. Specifications
| 3.1 Maximum absolute value | |||||||||
| حدود | Measurement level | Remarks | |||||||
| درجة حرارة التخزين | -55℃-90℃ | ||||||||
| VSUP to GND | -0.5-6.5V | ||||||||
| درجة حرارة التشغيل | -40-+85℃ | ||||||||
| RXD+/RXD-to GND | -7.5V~12.5V | Matching resistor 120Ω | |||||||
| RXD+to RXD- | ±6V | ||||||||
| TXD+/TXD-to GND | -7.5V~12.5V | ||||||||
| ExtTrig to GND | -0.3V-7V | ||||||||
| NRST to GND | -0.3V-7V | ||||||||
| DATA READY to GND | -0.3V-7V | ||||||||
3.2 EMC
| Test items | Testing standards | |||||||
| CE | Complies withEN55032 CISPR 16-2-1 | |||||||
| CS | Complies withEN55035 EN(IEC)61000-4-6 | |||||||
| EFT | Complies withEN55035 EN(IEC)61000-4-4 | |||||||
| RE | Complies withEN55032 CISPR 16-2-3 | |||||||
| RS | Complies withEN55035 EN(IEC)61000-4-3 | |||||||
| ESD | Complies withEN55035 EN(IEC)61000-4-2 | |||||||
3.3 Electrostatic Discharge (ESD) Level
| V(ESD) Electrostatic Discharge | Test Mode | Testing standards | Test Level | ||||||
| Contact Discharge | Complies with EN(IEC)61000-4-2 |
±8 KV | |||||||
| Air Discharge | ±15 KV | ||||||||
4. Electrical characteristics
| حدود | حالة | دقيقة | Typical Value | الأعلى | وحدة | ||
| Power Input | 4.5 | 5 | 5.5 | V | |||
| قوة | 0.7 | W | |||||
| درجة حرارة التخزين | -55 | 90 | ℃ | ||||
| درجة حرارة التشغيل | -40 | 85 | ℃ | ||||
| RS422 Input Resistance | 120 | Q | |||||
| RESET(NRST PIN) |
High | 2.3 | V | ||||
| Low | 0.6 | V | |||||
| NRST Internal Pull-Up Resistor’ | 4.7 | KΩ | |||||
| Data Ready | 3.3 | V | |||||
| ExtTrig | High | 2.3 | V | ||||
| Low | 0.6 | V | |||||
| Note: When the supply voltage exceeds 6V, the internal voltage protection circuit will disconnect the power supply and enter a reset state until the voltage returns to operating conditions, at which point normal operation will resume. | |||||||
| No.Pin | Pin NAme | Pin Description |
| 1 | 422_TX_Z | RS-422, TXD- |
| 2 | 422_RX_B | RS-422, RXD- |
| 3 | NC | Not connected |
| 4 | DATA READY | Data Ready |
| 5 | NRST | External hardware reset input, internally pulled up |
| 6 | GND | Signal ground |
| 7 | NC | Not connected |
| 8 | VIN | Power supply input, +5V input |
| 9 | 422_TX_Y | RS-422, TXD+ |
| 10 | 422_RX_A | RS-422, RXD+ |
| 11 | ExtTrig | External trigger pps |
| 12 | GND | Power supply ground |
| 13 | GND | Power supply ground |
| 14 | NC | Not connected |
| 15 | GND | Power supply ground |
إذا كان لديك حساب DHL أو FedEx ، فيمكننا اقتباس سعر EXW ، وإلا CIF أو FOB سعر.
بعد أن نقدم سعر العينة ، إذا كانت هناك حاجة إلى مزيد من الكمية ، فسنقتبس السعر بالجملة.
لأجهزة الاستشعار والأجزاء والوحدات النمطية: في أسبوع واحد ؛
بعد التأكيد على أن المنتج لديه مشاكل في الجودة ، سنحل محله لك مجانًا في أقصر وقت ممكن.
في هنا ، يتعلق الأمر بمنح العملاء الأكثر جودة.
