Product Overview
The IMU16460-E is a 6-degree-of-freedom MEMS inertial sensor module developed by Andelu Technology. It provides standard output for triaxial gyroscope and acceleration data.
Featuring high precision and resolution, it captures minute vibrations and inclinations. Its wide-range output enables motion detection under high-dynamic conditions. Each module undergoes factory-applied, ultra-wide temperature range fine-tuning and independent calibration, ensuring stable performance across extreme operating conditions while maintaining consistent product specifications.
Application Areas
Frequency-of-Freedom Inertial Sensor
AND-IMU16460-E Product Manual
Caractéristiques
Tactical-grade MEMS Gyroscope
Tactical-grade MEMS accelerometer
Extensive precision temperature compensation
Independent platform calibration
High-intensity operational endurance
Real-time flexible digital interface, compact size
● Dimensions: 22.4 × 22.4 × 9.0mm, Weight: 20g
1.1 Gyroscope performance indicators
| Paramètres | Test Conditions/Remarks | Min | Valeur typique | Max | Unité | ||
| Plage de mesure | ±640 | 。/s | |||||
| Zero Offset Instability | @25℃, ALLAN variance,1σ | 1.5 | ° / h | ||||
| Zero Offset Stability | NS，10-second smoothing | 4 | ° / h | ||||
| Zero Offset Repeatability | NS | 5.5 | ° / h | ||||
| Résolution | 0.0141 | ° / s | |||||
| Inter-axis Non-orthogonality | 0.02 | deg | |||||
| Internal Low-pass Cutoff Frequency | Software-adjustable | 40 | 250 | HZ | |||
| Taux d'échantillonnage | 1000 | HZ | |||||
| Measurement Delay | 7 | ms | |||||
| Zero Offset Drift Over Full Temperature Range | -40℃~85℃, ≤1℃/min @1σ |
0.02 | ° / s | ||||
| Random Walk | @25℃, ALLAN variance,1σ | 0.15 | °/ √hr | ||||
| Scale Factor Error | xy:1 z:0.5 |
‰ | |||||
| Non-linéarité du facteur d'échelle | 50 | ppm | |||||
| Note 1: IEEE standard, Allan variance curve provided at static 25°C environment Note 2: 1σ value of zero offset variation across full temperature range under 1°C/min heating rate |
|||||||
1.2 Accelerometer performance indicators
| Paramètres | Test Conditions/Remarks | Min | Valeur typique | Max | Unité |
| Plage de mesure | ± 16 | g | |||
| Zero Offset Instability¹ | @25℃, ALLAN variance,1σ | 20 | μg | ||
| Zero Offset Stability | NS，10-second smoothing | 50 | μg | ||
| Zero Offset Repeatability | NS | 0.2 | mg | ||
| Résolution | 0.3533 | mg | |||
| Inter-Axis Non-Orthogonality | 0.02 | deg | |||
| Internal Low-Pass Cutoff Frequency | Software-adjustable | 40 | 250 | HZ | |
| ODR | 1000 | HZ | |||
| Measurement Delay | 7 | ms | |||
| Zero Offset Drift Over Full Temperature Range² | -40℃~85℃, ≤1℃/min @1σ |
1.0 | mg | ||
| Random Walk¹ | @25℃, ALLAN variance,1σ | 0.08 | m/s/ √hr | ||
| Scale Factor Error | xy:0.5 z:1 |
‰ | |||
| Non-linéarité du facteur d'échelle | 100 | ppm | |||
| Note 1: IEEE standard, Allan variance curve provided at static 25°C environment Note 2: 1σ value of zero offset variation across full temperature range under 1°C/min heating rate |
|||||
3. Electrical characteristics
| 3.1 Maximum tolerance value | ||||||||||||
| Paramètres | Symbol | Gamme | Unité | |||||||||
| Tension d'alimentation | VCC | -0.3 to 6.5 | V | |||||||||
| Power Supply Ground | GND | 一 | 一 | |||||||||
| Input Pin Voltage | Vin | -0.3 to 5.8 | V | |||||||||
| Température de fonctionnement | Tot | -40 to 85 | ℃ | |||||||||
| Température de stockage | Tstg | -40 to 85 | ℃ | |||||||||
| 3.2Working conditions | ||||||||||||
| Paramètres | Symbol | Min | Valeur typique | Max | Unité | |||||||
| Tension d'alimentation | VIN | 4.5 | 5 | 5.5 | V | |||||||
| Maximum VIN Ripple | Vrpp | ±40 | mv | |||||||||
| Consommation d'énergie | P | 0.18 | W | |||||||||
| Température de fonctionnement | Tot | -40 | 85 | ℃ | ||||||||
| Température de stockage | Tstg | -40 | 85 | ℃ | ||||||||
| 3.3Threshold characteristics | ||||||||||||
| Paramètres | Symbol | Min | Valeur typique | Max | Unité | |||||||
| Input pin low level | Vin_low | 0 | VCC*0.2 | V | ||||||||
| Input pin high level | Vin_high | VCC*0.7 | VCC+0.2 | V | ||||||||
| Output pin low level | Vout_low | 0 | 0.45 | V | ||||||||
| Output pin high level | Vout_high | VCC-0.45 | VcC | V | ||||||||
| Note：VCC=3.3V | ||||||||||||
Si vous avez un compte DHL ou FedEx, nous pouvons citer le prix EXW, sinon CIF ou FOB Price.
Après avoir soumis le prix de l'échantillon, si plus de quantité est nécessaire, nous citerons le prix en vrac.
Pour les capteurs, les pièces et les modules: dans une semaine de stock-un;
Après avoir confirmé que le produit a des problèmes de qualité, nous le remplacerons gratuitement dans les plus brefs délais.
Chez ici, il s'agit de donner aux clients des produits de qualité les plus importants.
