ÜRÜNLER

Accelerometer Housing

The Accelerometer Housing is an external structural component designed to enclose and support the internal meter-head and servo sections of a compatible accelerometer. Its cylindrical body and mounting flange provide the mechanical interface required for final sensor assembly and system installation.

Şimdi Sohbet Edin

Ürün Detayları

An accelerometer may contain a pendulum assembly, upper and lower torquers, magnetic components, servo electronics, and electrical connections. The housing surrounds these components, protects the internal assembly and helps define the accelerometer installation position.

Housing compatibility depends on internal diameter, depth, flange profile, mounting-hole spacing and the interface with the meter-head and circuit components. These details should be verified before installation.

Contact Andelu to confirm housing dimensions and component compatibility.

Ürün Tablosu

Öğe Description
Product Type External accelerometer housing
Sensor Type Compatible accelerometer assembly
Primary Role Encloses and supports the internal meter-head and servo sections
Mounting Structure Cylindrical body with flange interface
Typical Use Accelerometer assembly, enclosure replacement and instrument installation
Works With Meter head, servo circuit, electrical terminals and mounting hardware
Compatibility Check Internal diameter, depth, flange profile, mounting-hole spacing and internal interfaces
Supply Scope Housing only; internal accelerometer components not included

SSS

What is installed inside the accelerometer housing?

Depending on the design, the housing may contain the pendulum assembly, torquers, magnetic components, servo circuit and electrical connections.

Is the housing supplied as a complete accelerometer?

No. This product refers to the housing component only unless the quotation states otherwise.

Can the housing be selected by external size alone?

No. Internal clearance, flange profile, mounting-hole spacing and interfaces with the internal components must also be checked.

What is the purpose of the flange?

The flange provides a mechanical interface for securing the assembled accelerometer to a compatible instrument, system or test fixture.

İlgili Ürünler

Isolation ring for accelerometer assembly
Isolation Ring for Accelerometers
Retaining ring for accelerometer meter-head assembly
Bellyband Retaining Ring for Accelerometers
Pendulum with coils for accelerometer
Pendulum with Coils for Accelerometers
Servo IC with two pole pieces for accelerometer
Servo IC with Two Pole Pieces for Accelerometers

BİZE ULAŞIN

BİZE ULAŞIN

EN KALİTELİ ÜRÜNLERİ Mİ ARIYORSUNUZ?

Burada her şey müşterilere en kaliteli ürünleri sunmakla ilgili.